Appendix A: Regulatory Information; Registration; Safety; Equipment Attachment Limitations - Nortel Meridian Companion Installation And Maintenance Manual

Appendix A: Regulatory information

Registration

Safety

Equipment attachment limitations

P0725810 Issue 3.0
This telephone system is registered with the DOC based upon
compliance with CS-03. Connection of the system to the customer
analog lines is made through a standard network interface jack
which you can order from your telephone company.
The COMPANION 200 system conforms to the requirements of
North American Regulatory Standards as specified in UL1459
Issue 2, and CSA C22.2 Number 225 M90.
The Canadian Department of Communications label identifies
certified equipment. This certification means that the equipment
meets certain telecommunication network protective, operational
and safety requirements. The Department does not guarantee the
equipment will operate to the user's satisfaction. Before installing
this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company.
The equipment must also be installed using an acceptable method of
connection. The customer should be aware that compliance with the
above conditions may not prevent degradation of service in some
situations. Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by the
supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the
COMPANION 200 Installation and Maintenance Guide
148