Hardware Option Cards; 10/100Base-Tx Ethernet Interface Card; Figure 23 10/100Base-Tx Ethernet Interface Card - Nortel 600 Installation Manual

Nortel 600: install guide
Hide thumbs Also See for 600:
Table of Contents

Advertisement

76 Appendix A Technical specifications

Hardware option cards

The VPN Router 600 has one expansion PCI slot that supports any of the
following option cards:
This section provides information about the option cards, including the connector
and the cable pinouts for each supported network interface card. For instructions
on installing an option card, see
on page

10/100BASE-TX Ethernet interface card

The 10/100BASE-TX Ethernet interface card has a single RJ-45 connector that
provides the signals needed to interface to 10BASE-T and 100BASE-TX Ethernet
equipment.
Figure 23

Figure 23 10/100BASE-TX Ethernet interface card

For information about the cables that you can connect to this interface and the
cable pinouts, see
NN46110-308 02.01
10/100BASE-TX Ethernet interface card
1000BASE-T (1000 GT) Ethernet interface card
56/64K CSU/DSU WAN interface card
ADSL WAN interface card
ISDN BRI S/T or U interface card
T1 CSU/DSU WAN interface card (full-height card)
T1/E1 CSU/DSU WAN interface card (half-height card)
Single V.35/X.21 WAN interface card
V.90 modem interface card
51.
shows the 10/100BASE-TX Ethernet interface card.
"10/100BASE-TX Ethernet LAN port" on page
Chapter 4, "Installing option cards and DIMMs,"
CS260009A
72.

Advertisement

Table of Contents
loading

Table of Contents