Figure 20 10/100BASE-TX Ethernet connector
RD+RD-
TD+
12345678
CS260010A
Table 14
provides the 10/100BASE-TX Ethernet port pinouts.
Table 14 10/100BASE-TX Ethernet port pinouts
Pin
1
2
3
6
Serial port
The system board provides a serial port on the rear of the chassis to enable
out-of-band management. Using the serial port, you can assign the management
IP address and subnet mask to the newly installed gateway (for more information,
see
Chapter 3, "Configuring the management IP interface," on page
The serial cable provided with the VPN Router 600 is a DB9/DB25-to-DB9/DB25
cable. This cable provides a crossover connection (transmit-to-receive and
receive-to-transmit). The DB9 connector goes into the gateway and the other DB9
or DB25 connector goes into your workstation
TD-
Description
RD +
RD -
TD +
TD -
Nortel VPN Router Installation — VPN Router 600
Appendix A Technical specifications 73
(Figure 21 on page
43).
74).