Figure 11 Removing The Screws From The Bottom Of The Vpn Router 600 - Nortel 600 Installation Manual

1
Shut down the VPN Router 600, and then unplug it as described in
down the system to add or replace hardware" on page
Warning: Risk of electric shock
Turn off the VPN Router 600 and unplug it before you attempt to
remove or install an option card or DIMM.
2
Turn the VPN Router 600 over to see the bottom of the gateway.
3
Use a Phillips screwdriver to remove the four screws that secure the bottom to
the chassis (Figure

Figure 11 Removing the screws from the bottom of the VPN Router 600

1
3
Chapter 4 Installing option cards and DIMMs 53
11).
Nortel VPN Router Installation — VPN Router 600
"Shutting
52.
2
4
CS60003A