Figure 14 Removing The Blank Bracket From The Option Card Slot - Nortel 600 Installation Manual

58 Chapter 4 Installing option cards and DIMMs
4

Figure 14 Removing the blank bracket from the option card slot

5
NN46110-308 02.01
Remove the blank PCI bracket by inserting a Phillips screwdriver into the slot
at the right of the blank PCI bracket and rotating the screw counterclockwise
(Figure 14).
Option card slot
Motherboard
Slide the option card into the option card slot
Do not bend the copper fingers in the slot.
Blank PCI bracket
(Figure 15 on page
Phillips screwdriver
Screwdriver
slot
CS60010A
59).