Break-In (Post-Dial) - Nortel Meridian M1250 User Manual

Basic call processing

Break-in (post-dial)

You can interrupt an existing connection in order to offer a call or relay an important message to one of
the parties.
• • • • 62 • • • •
1
Someone calls you and
requests that you relay a
message or extend the
call to someone already
on a call. Dial the
requested extension.
2
Press BKI to interrupt the
connection.
The lpk, ICI, and S
indicators go on steadily.
The D indicator flashes,
indicating that the
extension is busy. The
excl. src. indicator goes
on steadily while you are
dialing.
If the extension is idle, the
BKI indicator goes off, and
you hear ringing.
If the break-in is
temporarily denied, you
hear busy or fast busy
tone, and the BKI indicator
flashes. Press the
Release Destination key.
You can attempt a
post-dial break-in in a few
minutes or another
pre-dial break-in
immediately.
If break-in is denied
completely, you hear a
fast busy signal. Press
RLS dest.