Metering Calls - Nortel Meridian M1250 User Manual

Charge

Metering calls

Calling Party Numbers may consist of up to 23 digits (including * and # if needed). When an extension
or tie line user makes an outgoing call you can flag it as a metered call. Once the call has ended, you
receive a recall providing charge information for the call.
1
2
3
4a
4b
To meter a call, press the
lpk key beside the
flashing S indicator.
Dial the trunk access
code and Central Office
number.
Press meter.
To cancel the meter flag,
press meter again.
To extend the call, press
RLS.
The lpk and S indicators
go on. You are connected
to the caller.
The D and excl. src.
indicators go on.
The meter indicator goes
on.
The meter indicator goes
off.
The S, D, excl. src., and
meter indicators go off.
The RLS indicator goes
on; you are free to
process other calls.
• • • • 139 • • • •