Delivering A Message - Nortel Meridian M1250 User Manual

Message Center

Delivering a message

When someone calls to retrieve their messages, you can cancel the MSG WAITING signal at their
extension. You can also turn a MSG WAITING signal off when there is no call in progress.
1
2
3a
3b
4
You receive a call from
someone wishing to
retrieve a message.
Press the lpk key beside
the flashing S indicator
(or msg. ctr.) to answer.
Determine whether this
is a message retrieval
call for the displayed
extension. Relay the
message to the caller.
If the message retrieval
call is for the displayed
extension, press msg.
canc. If the message
retrieval call is not for the
displayed extension,
release the call (see step
3b).
Press msg. canc., dial
the extension that the
message was retrieved
for, then press msg.
canc. again.
Press RLS to end the
call.
The tone stops. The lpk
and S indicators go on
steadily. The msg. canc.
indicator flashes. The
msg. ctr. ICI indicator is
on.
The msg. canc. indicator
goes off. The MSG
WAITING indicator at the
dialed extension goes off.
The msg. canc. indicator
goes on steadily. The
msg. canc. indicator
flashes. The msg. canc.
indicator goes off. The
MSG WAITING indicator
at the dialed extension
goes off.
The RLS indicator goes
on; you are free to process
other calls.
• • • • 155 • • • •