Call Forward/Hunt Override - Nortel Meridian M1250 User Manual

Basic call processing

Call Forward/Hunt Override

1 Dial the FFC for
Call Forward/
Hunt Override
and the DN of the
wanted party.
If the telephone is idle,
the telephone is rung.
If the telephone(s) have
displays, the display (s)
are updated.
If the display on the
originating telephone is
updated when the call is
answered, the Call
Forward/Hunt Override
FFC will no longer be
displayed.
If the dialed telephone
is busy, and Hunt is active,
the calling party will
terminate on the wanted
telephone and will receive
a busy signal.
If the dialed telephone is
idle, but does not answer
within the defined number
of ringing cycles for Call
Forward/No Answer, the call
is not forwarded (that is,
it continues to ring).
If the dialed telephone is
busy, the attendant can
activate Camp-On, if Camp-
On is applicable. In addition,
Ring again can be placed
against a telephone for which
Call Forward/Hunt Override
was used an a busy telephone
was encountered.
• • • • 75 • • • •