Message Center; Taking A Message - Nortel Meridian M1250 User Manual

Message Center

Taking a message

A call is forwarded to you when the original destination is busy or does not answer. You can leave a signal
at the called extension, either during the call or when there is no call in progress, to indicate that a
message is waiting.
1
2
3
4
A call is forwarded to
you. Press the lpk key
beside the flashing S
indicator (or msg. ctr.
ICI) to answer.
Take the message.
Determine whether it is
intended for the
displayed extension.
If the message is
intended for the
displayed extension,
press msg. indic. If the
message is not intended
for the displayed
extension, press msg.
indic., dial a new
extension, and press
msg. indic. again.
Press RLS to end the
call.
The tone stops. The lpk
and S indicators go on
steadily. The msg. ctr. ICI
and msg. indicators are
on.
The msg. indicator goes
off. The MSG WAITING
signal at the dialed
extension goes on.
The RLS indicator goes
on; you are free to process
other calls.
• • • • 153 • • • •