Basic call processing
Remote Call Forward
• • • • 72 • • • •
1
Press an idle loop key
followed by the RFW
key.
2
Dial the DN of the
set to be forwarded.
RFW key is flashing. Loop
key is steadily lit.
If the password is
required, the RFW key is
winking, and the console
display shows "PWD". If
the console does not
support alpha characters,
the attendant display will
be blank.
If the password is not
required, the console
display will display the
DN of the set to be forwarded
followed by the CFW DN
stored on that set. The RFW
key lamp will display the
status of the CFW DN.
If RFW lamp is flashing,
then CFW is not active;
if RFW lamp is steadily lit
then CFW is active. Proceed
to step 4.