Answering Meter Recalls - Nortel Meridian M1250 User Manual

Charge

Answering meter recalls

When a metered call ends or is modified (for example, transferred), you receive a recall providing charge
information on the metered call. The recall is presented on the meter recall ICI key.
• • • • 140 • • • •
1
2
Note 1: Call charge information is displayed in the format XXXX YYYYY, where XXXX is the
extension to be charged (or the trunk access code, in the case of a tie line call), and YYYYY
is either the accumulated pulse count for the call or the total call charge.
Note 2:
You may receive more than one recall if the caller transfers the call internally. Each recall
shows the call charge for each portion of the call between transfers.
You receive a meter
recall. To answer it,
press the lpk key beside
the flashing S indicator.
Press RLS to end your
connection in the call.
The ICI indicator flashes.
The lpk and S indicators
go on steadily. The
identity of the metered
caller and call charge
information are displayed
(see note below).
The RLS indicator goes
on; you are free to
process other calls.