Remote Recall - Nortel Meridian M1250 User Manual

Centralized Attendant Service (CAS)

Remote recall

When you extend a call to an idle extension at a remote location and the called party does not answer
within a set time, you are automatically recalled by the caller.
1
2
3a
3b
Note: Recalls from remote locations travel over release link trunks (RLTs). Call source information
consists of an RLT access code and member number.
You receive a recall from
a remote location. Press
the lpk key beside the
flashing S indicator (or
remote) to answer the
call.
Press RLS dest.
If the caller wishes to end
the call, press RLS.
If the caller wishes to
speak to another party,
dial the new number,
then press RLS.
The tone stops and the lpk
and S indicators go on
steadily; you hear a beep
before being connected to
the caller. The remote ICI
indicator is on.
Ringing at the called
extension stops.
The RLS indicator goes
on; you are free to process
other calls.
The RLS indicator goes
on, you are free to process
other calls.
• • • • 133 • • • •