Declaration Of Conformity; Maintenance; Fs24X Plus™ Material Numbers - Honeywell FS24X Plus User Manual

Declaration of Conformity

Declarations of conformity (such as EU or UK Declarations of Conformity) and Product Information
are available at: https://sps.honeywell.com/us/en.

Maintenance

After the FS24X Plus™ Flame detector is installed and commissioned, the detector's window must be
kept clean. To ensure the detector is operating properly at all times, it may be necessary to establish
a periodic cleaning schedule. Inspect at least quarterly in dirty environments. Semi-annual or
quarterly testing should be performed, using the appropriate Honeywell® Test Lamp, to ensure the
integrity of the detector. A complete "end-to-end" test of the entire fire detection system should be
performed periodically depending on the application.
FS24X Plus™ Material Numbers
Product Material
A = Aluminum
FS24XP
S = Stainless Steel
FS24XP-ANGXX
FS24XP-AMGXX
FS24XP-SNGXX
FS24XP-SMGXX
Honeywell®FS24X Plus™ | User Manual
Entries Approvals
M = M25
G = Global
N = ¾'' NPT
FS24X Plus™ -3IR - AL - 3/4 NPT kit includes mount and sunshade
FS24X Plus™ - 3IR - AL - M25 kit includes mount and sunshade
FS24X Plus™ - 3IR - SS - 3/4 NPT kit includesmount and sunshade
FS24X Plus™ - 3IR - SS - M25 kit includes mount and sunshade
Reserved
X = Standard X = Standard
D = Demo M = Marine
Reserved
26