Table of Contents
Advertisement
Opening the Detector
It is necessary to remove the detector module electronic device from the enclosure to access the
field connections.
1.
Loosen, but do not remove, the set screw on the enclosure lid (see Figure below):
2.
Turn counterclockwise (CCW) to unscrew the enclosure lid (see Figure below):
3.
Loosen the three captive screws on the detector module electronic device (see Figure below):
Honeywell®FS24X Plus™ | User Manual
RISK OF ELECTRIC SHOCK
Disconnect power before unscrewing the Housing Lid.
CAUTION
17
Advertisement
Table of Contents
