Front Bezel - Sony EVI-HD7V Service Manual

1-2-2. Front Bezel

n
When removing and installing the front bezel, be careful not to leave fi ngerprints or scratches on the lens
surface.
1. Remove the side cabinet. (Refer to Section 1-2-1.)
2. Remove the front bezel by rotating it in the direction of the arrow.
3. To install, reverse the removal procedure.
m
. When attaching the front bezel, align the four hooks
of the front bezel with the four concave portions of
the camera cabinet.
. After attaching the front bezel, check that the front
side is not tilted upward when the front is lowered
(not greater than horizontal). If the front side is tilted
upward, check the earth cable routing.
. Check that the convex portion of the front bezel is
not placed on the concave portion of the camera
cabinet.
. Check that the front bezel is securely attached.
EVI-HD7V
Concave portion
Hook
Front bezel
Hooks
Camera cabinet
Concave
portions
1-3