Auto White Balance Standard Data Input - Sony EVI-HD7V Service Manual

2-3-10. Auto White Balance Standard Data Input

Adjust the white balance reference at 3200K, and adjust the normal coeffi cient of the light value.
Subject: Clear chart (All white frame)
Adjustment page: 6E
Adjustment address: 00 to 0F
m
. Perform "F Number and ND light Quality Correction" (Section 2-3-8) before this adjustment.
. If reading/writing data on page 6E, set data:06 to page:0, address:10, and then select page:E. By this
data setting, the page 6E can be selected.
After the data reading/writing fi nished, return the data on page:0, address:10 to "00".
. Check that the data of page:6, address:02 is "00". If not, select page:6, address:01, set data:00, and press
the PAUSE button.
Adjusting procedure
Order Page Address
1
2 0 01
3 6 4D
4
5 6 01
6 6 01
7 6 02
*1: The adjustment data will be automatically input to page:6E, address:00 to 0F.
Procedure after completing adjustment
Order Page Address
1 6 4D
2 6 01
3 0 01
EVI-HD7V
Data Operation
Check that the picture frame is "All White Frame". If not,
perform "2-3-9. Picture Frame Setting (All White Frame)".
01
40
Wait for 2 seconds.
43 Press the PAUSE button.
41 Press the PAUSE button. (*1)
Check that the data changes to "01".
Data Operation
00
00 Press the PAUSE button.
00
2-29