Table of Contents
Advertisement
Preset Position List (B-32004)
2
4
5
Outline
This screen is used to set preset positions.
Description
1.
Displays No. and the comments of the network camera selected in the Controller Selection screen.
2.
Displays the current PTZ values.
3.
Switches the preset position list.
4.
Displays the information of the preset positions.
No.
Slct. switch
Name
PTZ values
5.
Displays the operation mode of the camera recorder module.
6.
Performs the operations to the selected preset position.
Execute
Register
Delete
Remarks
・When the number of characters input to Name is less than 32, input spaces (0*20) to the spaces to which
the characters are not input.
・Functions can be operated are different depending on the operation mode of the camera recorder module.
Please refer to the table below.
Operation mode
PTZ enabled mode
PTZ preset mode
PTZ disabled mode
To execute PTZ control and preset function by the GOT, change the operation mode of the camera recorder
module by GX works3.
・When the preset operation is being executed, the other switches are turned into gray and cannot be
operated. Screen switching also cannot be performed.
・Preset names do not switch in accordance with the language switching of the GOT.
: No. of the preset position (1 to 16).
: Selects the preset position No. by touching the switch.
: Inputs a name. (Maximum 32 characters)
: Displays the PTZ values of the set preset positions. Does not display preset
positions which are not registered.
: Switches to the Live Feed screen and moves to the selected preset position.
Preset positions which are not registered cannot be executed.
: Reflects the name and the current PTZ values to the selected preset position.
: Deletes the registered contents of the selected preset position.
PTZ control
○
×
×
30/59
1
Preset registration
○
×
×
3
6
Preset execution
○
○
×
BCN-P5999-1333-2a
Advertisement
Table of Contents
Troubleshooting
