Table of Contents
Advertisement
Live Feed (B-32003)
1
2
3
Outline
This screen is used for live feed on the GOT.
Description
1.
Displays No. and the comments of the network camera selected in the Controller Selection screen.
2.
Displays the network camera video after starting the live feed.
Resolution of the video is different depending on sample project data as below.
Resolution of sample project data
XGA and GT SoftGOT (1024×631)
GT SoftGOT (1920×960)
3.
Performs the P(pan), T(tilt) and Z(zoom) settings of the network camera.
Sets -1000 to 1000 to P and T, and 0 to 1000 to Z. Sets the values (-1000 to 1000) relative to the actual
position (coordinates) from which the camera is recording.
Slider bar
Numerical input
Starts and stops the live feed.
4.
Start switch
Stop switch
5.
Displays the live feed status.
Stopped
Receiving
Failed to start
Failed to stop
6.
Displays the operation mode of the camera recorder module.
7.
Sets the movement speed of PTZ control. (100 to 1000)
8.
Moves to the selected preset position. Preset positions which are not registered cannot be executed.
Remarks
VGA
: Changes the set value by 1 point.
: Changes the set value by 1 point.
: Changes the set value by 1 point.
: Changes the set value by inputting a value directly.
: Starts the live feed of the network camera.
: Stops the live feed of the network camera.
: In this status, the live feed is not performed.
: In this status, the live feed is in progress.
: In this status, the live feed failed to start.
: In this status, the live feed failed to stop.
28/59
Resolution of video
QVGA
VGA
SVGA
BCN-P5999-1333-2a
4
5
6
7
8
Advertisement
Table of Contents
Troubleshooting
