Table of Contents
Advertisement
USING THE PROJECTOR
Projector settings menu (OSD)
Press "
" on the remote control or on the Home screen, select the OSD menu "
or manage various settings related to the image, display, 3D, audio, and setup.
General menu navigation
Main Menu
1.
When the OSD menu is displayed, use the up and down navigation buttons to select any item in the
main menu. While making a selection on a particular page, press "OK" to enter submenu.
2.
Press the "Left" and "Right" button to select the desired menu item. Then press "OK" to open its sub
menu.
3.
Press the "Up" and "Down" button to select the desired item in the sub menu.
4.
Press the "OK" button to enable or disable a setting or press the "Left" and "Right" button to adjust a
value.
5.
Select the next item to be adjusted in the sub menu and modify as described above.
6.
To exit, press "
automatically save the new settings.
Sub Menu
Image Settings
Enhanced Gaming
3D
Aspect Ratio
Edge Mask
Digital Zoom
Image Shift
Geometric Correction
Select
" (repeatedly if necessary). The OSD menu will close and the projector will
" to review projector information
Settings
Display
Off
Exit
Enter
Navigation guide
25
English
Advertisement
Table of Contents
