Table of Contents
Advertisement
ADDITIONAL INFORMATION
Other problems
The projector stops responding to all controls
‡
If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before
reconnecting power.
Remote control problems
If the remote control does not work
‡
Check the operating angle of the remote control is pointed within ±15° (horizontally) or ±10° (vertically)
to the IR receiver on the projector.
‡
Make sure there are not any obstructions between the remote control and the projector. Move to within
12 m (39.4 ft) of the projector.
‡
Make sure batteries are inserted correctly.
‡
Replace batteries if they are exhausted.
77
English
Advertisement
Table of Contents
