Table of Contents
Advertisement
USING THE PROJECTOR
Projector settings menu (OSD)
Press "
" on the remote control, select the OSD menu "
settings related to the image, display, 3D, audio, and setup.
General menu navigation
1.
When OSD is displayed, use the "Up" and "Down" navigation buttons to select any item in the main
menu. After making a selection on a particular page, press " " on the keypad or " " on the remote
control to enter submenu.
2.
Press the "Left" and "Right" button to select the desired menu item. Then press " " on the keypad or
" " on the remote control to open its sub menu.
3.
Press the "Up" and "Down" button to select the desired item in the sub menu.
4.
Press " " on the keypad or " " on the remote control to enable or disable a setting or press the "Left"
and "Right" button to adjust a value.
5.
Select the next item to be adjusted in the sub menu and modify as described above.
6.
To exit, press "
automatically save the new settings.
22
English
Main Menu
" (repeatedly if necessary). The OSD menu will close and the projector will
" to review projector information or manage various
Sub Menu
Display
Image Settings
Enhanced Gaming
3D
Aspect Ratio
Zoom
Image Shift
Geometric Correction
Exit
Select
Navigation guide
Settings
Off
4:3
0
Enter
Advertisement
Table of Contents
