Table of Contents
Advertisement
USING THE PROJECTOR
Security menu
Security
Enable this function to prompt for a password before using the projector.
‡
On: Choose "On" to use security verification when the turning on the projector.
‡
Off: Choose "Off" to be able to switch on the projector without password verification.
Note:
The default password is 1234.
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.
HDMI link settings menu
Note:
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them
on the same power on or power off status using the HDMI Link control feature in the projector's OSD. This
lets one device or multiple devices in a group power on or power off via HDMI Link Feature in a typical
configuration, your DVD player may be connected to the projector through an amplifier or home theater
system.
HDMI Link
Enable/disable the HDMI Link function.
Inclusive of TV
If the settings is set to "Yes" then the power on and power off link options are available.
Power On Link
CEC power on command.
Mutual: Both projector and CEC device will be turned on simultaneously.
‡
‡
PJ Device: The CEC device will be turned on only after the projector is switched on.
‡
Device PJ: The projector will be switched on only after the CEC device is turned on.
Power Off Link
Enable this function to let both HDMI Link and projector to be automatically turned off at the same time.
42
English
HDMI
Amplifier
HDMI
DVD Player
Advertisement
Table of Contents
