Table of Contents
Advertisement
USING THE PROJECTOR
Control menu
Wireless
Configure wireless network settings.
‡
Wi-Fi: Set the Wi-Fi option to "ON" to enable wireless network feature.
‡
Available Network SSID: Select your desired wireless access point and enter or configure the
necessary connection parameters (if required), for example password, proxy settings, and IP address.
For information, you can review the signal strength.
Choose "Cancel" to return to the Network menu without saving settings. Choose "Forget" to delete the
wireless network profile.
Note:
Whenever you need to input symbols, the system will automatically pop-up an onscreen
keyboard.
‡
Add New Network: Manually enter the network name.
‡
Portable Hotspot: Configure the projector to behave as a wireless access point for other devices.
Ethernet
Configure wired network settings.
Note:
Make sure you have connected the projector to local area network (LAN). Please refer to page 16.
‡
Proxy Settings: Provide proxy hostname, connection port and bypass proxy domains information
manually if requested.
IP settings: Enable DHCP if you want the projector to obtain IP address and other connection
‡
parameters automatically from your network. Disable DHCP if you want to assign IP address,
gateway, network prefix length, and DNS parameters manually.
‡
Reset: Return the factory default settings for network settings.
OMS
Use this software to manage your devices remotely, including broadcasting emergency messages, real-time
monitoring and alerts, and scheduling on/off time of the devices.
51
English
Advertisement
Table of Contents
