Table of Contents
Advertisement
USING THE PROJECTOR
Edge mask menu
Edge Mask
Use this function to remove the video encoding noise on the edge of video source.
Digital zoom menu
Digital Zoom
Use to reduce or magnify an image on the projection screen. Digital Zoom is not the same as optical zoom and an
result in degradation of image quality.
Note:
Zoom settings are retained on power cycle of the projector.
Image shift menu
Image Shift
Adjust the projected image position horizontally (H) or vertically (V).
Geometric correction menu
Four Corners
This setting allows the projected image to be adjusted from each corner to make a square image when the
projection surface is not level.
Note:
While adjusting the Four Corners, the Digital Zoom, Aspect Ratio, and Image Shift menus are disabled. To
enable Digital Zoom, Aspect Ratio, and Image Shift, reset the Four Corners settings to the factory defaults.
H Keystone
Adjust image distortion horizontally and make a squarer image. Horizontal keystone is used to correct a keystoned
image shape in which the left and right borders of the image are unequal in length. This is intended for use with
horizontally on-axis applications.
V Keystone
Adjust image distortion vertically and make a squarer image. Vertical keystone is used to correct a keystoned
image shape in which the top and bottom are slanted to one of the sides. This is intended when for use with
vertically on-axis applications.
Auto Keystone
Correct keystone digitally to fit the projected image on the area on which you are projecting.
Note:
‡
The image size will reduce slightly when adjusting the horizontal and vertical keystone.
‡
When the Auto Keystone is used, the Four Corner Adjustment function will be disabled.
Reset
Return the factory default setting for Geometric Correction settings.
‡
Cancel: Select to cancel Reset.
OK: Select to return the factory default settings for Geometric Correction.
‡
39
English
Advertisement
Table of Contents
