Table of Contents
Advertisement
USING THE PROJECTOR
Projector settings menu (OSD)
Press "
" on the remote control or on the Home screen, select the OSD menu "
or manage various settings related to the image, display, 3D, audio, and setup.
General menu navigation
Main Menu
Sub Menu
Settings
1.
When OSD is displayed, use the up and down navigation buttons to select any item in the main menu.
While making a selection on a particular page, press "OK" to enter submenu.
2.
Press the "Left" and "Right" button to select the desired menu item. Then press "OK" to open its sub
menu.
3.
Press the "Up" and "Down" button to select the desired item in the sub menu.
4.
Press the "OK" button to enable or disable a setting or press the "Left" and "Right" button to adjust a
value.
5.
Select the next item to be adjusted in the sub menu and modify as described above.
6.
To exit, press "
automatically save the new settings.
24
English
" (repeatedly if necessary). The OSD menu will close and the projector will
" to review projector information
Hide quick links:
Advertisement
Table of Contents
