Installation Checklist; Table 1 Installation Checklist - Nortel BayStack Instant Internet 100-S User Manual

Nortel baystack 100-s: user guide
Hide thumbs Also See for BayStack Instant Internet 100-S:
Table of Contents

Advertisement

Installation checklist

Use the checklist in
item, record the information in the

Table 1 Installation checklist

Item
Type of Account
Dial-up Protocols
ISDN Service
Connect-Time
Charges
PPPoE
Table 1
to ensure a smooth installation. As you check off each
"Installation worksheet" on page
Description
Instant Internet can provide access to your entire network
through a single Internet Protocol (IP) address for
unlimited access to the Internet:
If you want to use public IP addresses, request a
network account.
If you want to use Network Address Translation (NAT)
or you are using the Instant Internet unit as an
IPX-to-IP gateway, request a single-user account.
Your ISP will provide you with a user name, password,
primary access phone number, optional alternate access
phone number, and name server IP address. Record this
information on
If you are using a dial-up connection in North America,
ensure that your ISP supplies true IP service using PPP
protocols for analog and ISDN connections. ISDN
requires the synchronous PPP protocol with
authentication via Password Authentication Protocol
(PAP) or Challenge Handshake Authentication Protocol
(CHAP).
For a 128K connection, Multilink PPP must be supported.
Some ISPs use their own proprietary protocols or, for
ISDN, V.120 rate adaption. Instant Internet does not
support these proprietary protocols.
When you obtain ISDN service, your telephone company
may assign one or two Service Profile Identifier (SPID)
numbers to your line. Record the SPID number(s) on
page
31.
Some ISPs and local telephone companies charge a flat
fee for unlimited connect time, and some charge fees
according to the actual amount of time your Instant
Internet unit is dialed in and connected. Be sure that you
understand your ISP's and local telephone company's
policies.
If you are connecting using PPPoE, you must obtain a
user name and password from your ISP. Record this
information on
Setting Up the BayStack Instant Internet 100-S Unit
Chapter 2 Installation preparation
page
31.
page
31.
29
31.

Advertisement

Table of Contents
loading

Table of Contents