Table 3 Communications Interface Cards - Nortel BayStack Instant Internet 100-S User Manual

Table 3
Internet 100-S unit.

Table 3 Communications interface cards

Interface name Interface card
Analog
Dual Analog
ISDN U
ISDN S/T
1-Meg Modem
Chapter 3 Instant Internet 100-S hardware installation
describes the communications interface cards available for your Instant
Phone
1 2
Line
9858EA
9857EA
9856EA
10047EA
LOOP
SYNC
LOOP
RX/TX
9874EB
Setting Up the BayStack Instant Internet 100-S Unit
Type
Analog modem interface card
with one RJ-11 connector for
the phone (outgoing to modem)
and one RJ-11 connector for the
telco (incoming from wall jack).
Analog modem interface card
with two RJ-11 connectors for
phones (outgoing to modem)
and two RJ-11 connectors for
telcos (incoming from wall jack).
ISDN U interface card
(integrated NT1) with one
POTS connector and one RJ-45
connector.
ISDN interface card (no
integrated NT1) with one POTS
connector and one RJ-45
connector.
1-Meg modem interface card
with one RJ-11 connector for
the phone (outgoing to modem)
and one RJ-11 connector for the
telco (incoming from wall jack).
37