3
Turn on your unit.
The LEDs on the front of your unit flash and then glow steadily amber,
including the Power LED, when they completely match the sequence for the
selected switch settings.
Note: If you used the switch settings in
password and configuration switch settings, the Power LED glows amber
and LEDs 1–8 flash red in the sequence of the selected switch settings.
4
Turn off your unit.
5
Reset the switches for normal operation.
Normal operation is when all the switches are in the off position. Refer to
"Switch settings for normal operation" on page
6
Turn on your unit.
Chapter 5 DIP switch settings
Table 9
Setting Up the BayStack Instant Internet 100-S Unit
to disable the reset
52.
55