Chapter 1 Introduction; Instant Internet Package - Nortel BayStack Instant Internet 100-S User Manual

Chapter 1
Introduction
This chapter introduces your Instant Internet 100-S unit and describes package
contents, available options for your Instant Internet unit, and any requirements
and compatibility issues.

Instant Internet package

The Instant Internet package contains:
•
•
•
•
Caution: Before you install your unit, make sure that the power voltage
selector switch setting matches your power voltage. For details, refer to
"Setting the voltage selector switch" on page
Instant Internet 100-S unit
Depending on the type of connection you ordered, your Instant Internet
package contains one or more of the following connector cables:
— RJ-11 cable (phone cord) for a dial-up connection or 1-Meg modem
connection
— ISDN cable for an Integrated Service Digital Network (ISDN) connection
— RJ-45 cable for a 10BASE-T or 100BASE-T Ethernet connection
— RJ-45 crossover cable for a 10BASE-T or 100BASE-T Ethernet
connection
Important Information for the BayStack Instant Internet
(Part number 307603-E)
Installing the BayStack Instant Internet Management Software Version 7.11
(Part number 209226-B)
Setting Up the BayStack Instant Internet 100-S Unit
40.
25