Table of Contents
Advertisement
4.2
Debug Message
ROM-7510 can connect to a host PC (Linux or Windows) by using a console cable
and debug port adapter. In order to communicate with host PC, a serial communica-
tion program such as HyperTerminal, Tera Term or PuTTY is required. Below are the
detailed instructions for how to set up serial console, and HyperTerminal on a Win-
dows host:
1.
Connect ROM-7510 to your Windows PC by using a serial cable, debug port
adapter and console cable.
2.
Open HyperTerminal on your Windows PC, and select the settings as shown in
Figure 4.1.
3.
Press the "POWER" key to power up the board. The bootloader prompt is dis-
played on the terminal screen.
Figure 4.1 HyperTerminal Settings for Serial Console Setup
25
ROM-7510 User Manual
Advertisement
Table of Contents
