Page 1
Thornbury Slatted Back Dining Chair Assembly Instructions 343761 - Please keep for future reference 380/8089 Dimensions Width - 46 cm Depth - 50 cm Height - 90 cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline:...
Safety and Care Advice Important - Please read these instructions fully before starting assembly • We do not • Check you have all the • During assembly do not stand components and tools listed on or put weight on the product, this recommend the the following pages.
Components - Parts If you have damaged or missing components, call the Customer Helpline: Homebase = 0345 077 8888 Please check you have all the parts listed below Note: The quantities below are the correct amount to complete the assembly of one chair. Siderail x 2 Backrest Front Leg...
Page 4
Assembly Instructions Step 1 Attaching siderails Place the front leg a flat protected surface. Insert wood dowels the holes on the siderails . Position the siderails as shown and insert the wood dowels in the holes on the front leg. Then fix using bolts spring washers flat washers...
Page 5
Assembly Instructions Step 3 Attaching seat Place the seat face down on a raised protected surface. Position the chair on center of the seat and fix using screws Tighten screws using a crosshead screwdriver. Note: Fully tighten all screws assembled in previous steps.
Need help?
Do you have a question about the 343761 and is the answer not in the manual?
Questions and answers