Table of Contents
Advertisement
Setting
Top Priority Protocol
Wide-Area Bonjour
iBeacon Settings
Setting
Enable iBeacon Transmission
SLP Settings
Setting
Enable SLP
WSD Settings
Setting
Enable WSD
Printing Timeout (sec)
Scanning Timeout (sec)
Device Name
Location
LLTD Settings
Setting
Enable LLTD
Options/Description
Selects the protocol that is the top priority for Bonjour printing
Enables the Wide-Area Bonjour protocol; register all products
on the DNS server to locate them over the segment
Options/Description
Enable the iBeacon transmission function
Options/Description
Enable the SLP function to use the Push Scan function and
network searching in EpsonNet Config
Options/Description
Enable adding devices using WSD, and printing and scanning
from the WSD port
Enter the communication timeout value for WSD printing
between 3 and 3,600 seconds
Enter the communication timeout value for WSD scanning
between 3 and 3,600 seconds
Displays the WSD device name
Displays the WSD location name
Options/Description
Enable LLTD to display the product in the Windows network
map
334
Advertisement
Table of Contents
