After Use - Withings WSM02 Product Manual

Table of Contents

Available languages

Safety and Performance

Guidance and manufacturer's declaration - electromagnetic immunity

The device Sleep Analyzer is intended for use in the electromagnetic environment specified below. The customer or the user of the device Sleep Analyzer should ensure that it is used

in such an environment.

Immunity test

IEC 61000-4-2:2008 ED 2.0

IEC 61000-4-3:2010 ED 3.2

IEC 61000-4-4:2012 ED 3.0

IEC 61000-4-5:2017 ED 3.1

IEC 61000-4-6:2013 ED 4.0

IEC 61000-4-8:2009 ED 2.0

IEC 61000-4-11:2004 ED 2.0

After Use

Cleaning and maintenance

To clean the textile cover of the sensor, gently remove the cover first. The cover can be machine washed, but do not tumble dry or iron it. Wait until the

cover is completely dry before replacing it on the sensor.

Storage

Store the device and the components in a clean and safe location. If storage conditions are different from the usage conditions indicated in this doc-

ument, please wait 30 minutes before installing the device.

Disposal

Actuation of European directive 2012/19/EU, for reduction in use of dangerous substances in the electric and electronic device and for garbage

disposal. The symbol applied on the device or its packaging means that at the end of its useful life, the product must not be disposed of separately,

not as unsorted municipal waste with domestic waste. At the end of the device's useful life, the user must deliver it to a collection center for electric

and electronic garbage, or return it to the retailer when purchasing a new device. Disposing of the product separately prevents possible negative

environmental and health consequences deriving from inadequate disposal. It also allows the recovery of materials it is composed of to save en-

ergy and resources and avoid negative effects to the environment and health. In case of abusive disposal of devices by the user, will be applied

administrative endorsements in compliance with current standards. The device and its parts must be disposed of as appropriate, in accordance

with national or regional regulations.

1282

IEC 60601 test level

Contact Discharge: ± 2 / ± 4 / ± 6 kV / ± 8 kV

Air Discharge: ± 2 / ± 4 / ± 8 / ± 15 kV

Radio Frequency Electromagnetic Field (RS)

Proximity fields from RF wireless communications

equipment