After Use - Withings BPM Connect Instruction Manual

After use

Cleaning
- Do not use an alcohol-based or solvent agent to clean
the device.
- Clean the device with a soft and dry cloth.
- The dirt on the cuff can be cleaned with a damp cloth
and soap.
- Do not flush the device and cuff with a lot of water.
- Do not dismantle the device, disconnect the cuff, or try
to repair it by yourself. If a problem occurs, please check
with the distributor.
- Do not operate the device in a severe environment of
extreme temperature, humidity, or direct sunshine.
- Do not shake the unit violently.
- Do not submerge the device or any of the components
in water.
- Do not use the device after a strong shock, such as
dropping the unit on the floor.
Storage
- Store the device and the components in a clean and safe
location.
- If storage conditions are different from the usage
conditions indicated in this document, please wait 30
minutes before taking a measurement.
Maintenance
If you cannot fix the problem using the troubleshooting
instructions, request service from your dealer. The
manufacturer will make available on request circuit
diagrams, component part lists, descriptions, calibration
instructions, or other information that will assist the
manufacturer's staff or authorized representative with
repair. It is generally recommended to have the device
inspected every 2 years to ensure proper functioning and
accuracy. Do not use the device while doing maintenance
steps.
16-17