Unit Construction Danx - Xks; Unit Construction Danx - Xk - Dantherm DanX 2/4 XKS Installation, Commissioning And Service Manual

3. INSTALLATION
3.1.2 Unit construction DanX – XKS with integrated mixing box
The DanX – XKS consist of a cross flow heat exchanger with an integrated mixing box.
.
From left to right the unit consists of the following components/modules:
1) Heating coil with supply air fan below*.
2) Return air fan and return air filter above.
3) Cross flow heat exchanger.
4) Outdoor air filter above.
*If the unit is equipped with centrifugal fans instead of plug fan then the LPHW heating coil is
placed before the supply air fan!
3.1.3 Unit construction DanX – XK with separate mixing module
The DanX – XK consist of a cross flow heat exchanger with a separate mixing box.
From left to right the unit consists of the following components/modules:
1) Heating coil with supply air fan below*.
2) Return air fan and return air filter above.
3) Mixing module.
4) Cross flow heat exchanger.
5) Outdoor air filter above.
*If the unit is equipped with centrifugal fans instead of plug fan then the LPHW heating coil is
placed before the supply air fan!
7