Emptying The Drip Tray And Coffee Grounds Container; Preparing Beverages; Setting The Coffee Strength - Melitta Avanza 600 Series Operating Instructions Manual

To ensure that sufficient milk can be
drawn in, the end of the hose must not
touch the bottom of the vessel.
4.6 Emptying the drip tray
and coffee grounds
container
When the drip tray (9) and the coffee
grounds container (8) are full, the Drip
tray display lights up and requests you to
empty the container The display appears
after preparing approx. 8 beverages.
The projecting float (14) also indicates that
the drip tray is full.
Always empty both containers. When the
drip tray is pulled out, the Drip tray display
flashes.
Fig. 11: Emptying the drip tray and coffee
grounds container
1. Pull the drip tray (9) forwards out of the
appliance.
2. Remove the coffee grounds container
(8) and empty it.
3. Empty the drip tray.
4. Insert the coffee grounds container.
5. Push the drip tray into the appliance up
to the stop.
8
14
9
Information
If you empty the drip tray and the coffee
grounds container while the appliance
is switched off, the appliance does not
register this process. Therefore, it is possi-
ble that you are requested to empty the
containers although the drip tray and the
coffee grounds container are not yet full.
5

Preparing beverages

There are two options for preparing bev-
erages:
ū Preparing coffee beverages at the out-
let for coffee beverages or
ū Preparation of hot water and milk foam
at the Cappuccinatore.
Please note:
ū There should always be sufficient water
in the water tank. If the filling level is
too low, the appliance requests you to
refill it.
ū There should always also be sufficient
coffee beans in the bean container. If
there are no longer any coffee beans
present, the appliance stops the prepa-
ration of a coffee beverage.
ū The appliance does not indicate a lack
of milk.
ū The vessels for the beverages should be
sufficiently large.
The maximum coffee quantity is
220 ml.
5.1 Setting the coffee
strength
As soon as the appliance is ready for oper-
ation, it displays the current setting of the
coffee strength.
The following settings for the coffee
strength are possible:
Display Coffee strength
Mild
Normal
Strong
Preparing beverages
41