Setting The Coffee Quantity; Preparing The Coffee Beverage; Stopping Coffee Preparation; Preparing Two Coffee Beverages Simultaneously - Melitta Avanza 600 Series Operating Instructions Manual

Preparing beverages
You can adjust the coffee strength by
pressing the "Coffee strength" button one
or more times.
You can adjust the coffee strength before
the beverage is dispensed or during the
grinding process.
Information
When switching off the appliance, the last
set coffee strength is stored.
5.2 Setting the coffee
quantity
Fig. 12: Setting the coffee quantity
You can set the coffee quantity with the
"Coffee quantity" (19) rotary regulator.
You can adjust the coffee quantity before
the beverage is dispensed or during the
grinding process.
Coffee quantities are continuously adjusta-
ble between 25 ml and 220 ml.
5.3 Preparing the coffee
beverage
Requirement: The appliance is ready for
operation.
1. Place a vessel beneath the outlet.
Press the "Coffee" direct key.
2.
» The grinding process and beverage
dispensing start.
» Beverage dispensing ends automat-
ically.
3. Remove the vessel.
42
5.4 Stopping coffee
If you want to stop the preparation of a
coffee beverage prematurely, press the
direct key again.
5.5 Preparing two coffee
You can prepare two coffee drinks simul-
taneously with the "2 cups" button. For
two-cup dispensing, the appliance carries
out two grinding processes.
19
Fig. 13: Two-cup dispensing
1. Place two vessels beneath the outlet.
2.
3.
4. Remove both vessels.
ū The setting only applies to the single
preparation
beverages simultaneously
Press the"2 cups" button (28).
The 2 cups display lights up.
»
Press the "Coffee" direct key.
» The grinding process and beverage
dispensing start.
» Beverage dispensing ends automat-
ically.
Information
beverage that is prepared.
28