Kubota MX Series Operator's Manual page 73

(1) Steering wheel tilt lever
NOTE :
• Adjust the operator's
suspension to make sure that the controls
are comfortably at hand for the operator,
making sure that the operator maintains a
good posture and minimizes risks from
whole body vibration.
2. Start the engine.
(See STARTING
TRANSMISSION TYPE] on page 57)
WARNING
To avoid personal injury or death:
• Read and understand Safe operation in the
front of this manual.
• Read and understand the safety labels
located on the tractor.
• To avoid the danger of exhaust-fume-
poisoning, do not operate the engine in a
closed building without proper ventilation.
• Never start the engine while standing on
ground. Start the engine only from the
operator's seat.
• Always set all shift levers to the "NEUTRAL"
positions and to place the PTO-clutch-
control-switch in the "OFF" position before
starting the engine.
3. Select the positions of the light switches.
(See Head light switch on page 34 and Hazard light
switch and turn signal light switch on page 34)
MX5400,MX6000
(A) Press down
seat and
THE ENGINE [MANUAL
[ROPS type]
[CAB type]
the
(1) Turn signal light switch
(2) Head light switch
(3) Hazard light switch
(4) Turn signal / hazard light in-
dicator
OPERATING THE TRACTOR
(A) Off
(B) On (low)
(C) On (high)
69