7.6 Air duct components in freezing chamber and fan motor
Air duct assembly in freezing chamber
1) Use cross screwdriver to rotate anticlockwise, for
remove the 4 pcs screws;
2) Dismantle the air duct cover outwards;
3) pull out the fan motor and temperature sensor plug-in
terminal at the upper right corner.
Fan motor of air duct
1) Make air duct aluminum foil be away from the back
cover of air duct, Use cross screwdriver to rotate
anticlockwise, for remove the 1 pcs screw;
2)Use slotted screwdriver to dismantle the clips of air
duct cover;
34
Service Manual_2022-V2.0