Air Duct Components In Freezing Chamber And Fan Motor - Midea TMF No Frost Series Service Manual

1）Remove two screws from the refrigerating air duct
with a cross screwdriver;
2）Pull all connector terminals out of the refrigerating
air duct to remove its components;
Fan motor of air duct

7.5 Air duct components in freezing chamber and fan motor

Air duct components in freezing chamber
All accessories in the freezing chamber should be
dismantled before removing the air duct components.
1） Remove 2 screws on the cover plate of the freezing air
duct using a cross screwdriver
2） Hold the middle position upper of freezer air duct, raise
it then pull it outwards gently.
3）Pull out the connector terminal.
None
26
Service Manual_2020-V1.0