AC Infinity AIRTITAN Series User Manual page 12

FAN MOUNTING
STEP 3 (Foundation Block Mounting)
To install the unit onto a foundation brick or
block, mark the mounting hole locations using
the four corners of the metal face plate. Then
drill 5/16" holes with a drill bit. Install wall
anchors into openings and secure the unit into
the wall with four screws.
STEP 3 (Wall and Surface Mounting)
Secure the mounting frame onto the surface
with the included wood screws. If using a
machine screw with nuts, you may need to
drill a hole.
12
AIRTITAN T8/T8N Illustration shown above.
AIRTITAN T8/T8N Illustration shown above.