Preparing Rip Data - MIMAKI UJV100-160 Operation Manual

2.8 Preparing RIP data

The explanation here applies to MIMAKI RIP software (RasterLink).
• Prepare suitable image data for printing.
1
Launch RasterLink.
• Click the icon on the PC desktop.
2
Select the image data to print.
(1) Select [File] > [Open].
(2) Select the desired image data, then click [Open].
• If multiple printers are registered, select UJV100-160 in "Printer Name".
3
Select the image data imported.
• The image is displayed in the tab for UJV100-160 selected in "Printer name".
4
Check the settings and alter as necessary.
• Specify the following settings by clicking the function icons shown on the right-hand side of the
screen:
(normal printing): Specifies settings like enlargement/reduction and number of copies.
(print conditions): Selects a color profile for the media and ink set loaded in this machine.
69
Chapter 2 Printing
2