Media Cutter Replacement - MIMAKI UJV100-160 Operation Manual

Uv inkjet printer
Hide thumbs Also See for UJV100-160:
Table of Contents

Advertisement

Chapter 4 Maintenance
• If there is no media stopper, secure the screw in the screw hole shown in the figure.
8
Close the maintenance covers.

Media Cutter Replacement

Replace cutters when blades are chipped or blunt.
• Avoid touching the cutter blade. Failure to do so may result in injury.
• Avoid storing this product in locations accessible to children.
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Move To Platen Right End], then press the [ENTER] key.
• The carriage moves over the platen.
3
Open the front cover.
• The carriage can be moved by hand. Move the carriage slowly to a position allowing easy
access for replacing the cutter.
4
Unscrew the screw, then open the carriage cover hatch.
114

Advertisement

Table of Contents
loading

Table of Contents