Setting The System Time; Updating Firmware - HP J2000 Maintenance And Operation

Remote Role Mapping
LDAP users are assigned to roles by an LDAP lookup. The Groups attribute for the user being authenticated is searched
for a match for role assignment.
Service Addresses
The service addresses for one or more LDAP services are required when LDAP authentication is enabled. Addresses are
entered in URL form, and can be in Lightweight Directory Application Protocol (LDAP) or Secure LDAP (LDAPS) - for
example, ldaps://DC-Alpha.MyCompany.com:636.
Groups must be expressed with the full Common Name notation - for example, CN=J2000-
Admin,OU=J2000,DC=MyCompany,DC=com.

Setting the system time

You can synchronize the network clocks by using the Network Time Protocol (NTP), or you can set the time manually.
Prerequisites
Requires Administrator privileges
Procedure
1. Select the TIME tab in the Admin Dashboard.
2. To synchronize the network clocks by using NTP:
a. Click the NTP radio button.
b. Enter the name or IP address of the NTP server in the NTP Servers box.
c. Select the time zone from the Timezone drop-down list.
d. Click Save.
3. To set the time manually:
a. Click the Manual radio button.
b. Select the time zone from the Timezone drop-down list.
c. Click the calendar icon, set the date and time and click the Check mark.
d. Click Save.

Updating firmware

The FIRMWARE window displays a list of previously uploaded firmware with the firmware name and version.
NOTE: While you can update the firmware on the device, the preferred method is using Smart Components to update the
firmware.
Prerequisites
Updating firmware requires Administrator privileges.
All users can upload firmware. Obtain the latest firmware files from www.hpe.com/storage/DiskEnclosureFirmware or
from your HPE support representative.
9
Operation