Option 2 - In-Ground Anchor - Shadowspec UNITY OCTAGON DUO Owner's Manual

Figure 6 - Freestanding Base Parts
Unity Spigot
1.
Base Frame
Threaded Feet
Unity Screws* Serenity Screws*
*Both Serenity and Unity Screws are included in box. Only use the set required for your Unity (Serenity Screws will be surplus).
OPTION 2 - IN-GROUND ANCHOR
For installation you will require:
• Wheelbarrow and Spade.
• Concrete Mix - Not included. Can be purchased from your closest building supply store eg Home Depot / Bunnings.
• Spare wooden planks or other bracing materials
• Hex Key Set - Included in your umbrella box
Step 1 Choose your site and ensure the ground is level. Check for buried utilities.
Step 2 Dig your footing hole at least 500mmW x 500mmL x 600mmH / 1'7" x 1'7" x 1'11". It is recommended that
you flare the footing hole slightly at the base for extra stability - See
Step 3 Using the Screws supplied with your Umbrella, fit the spigot to the In-Ground Anchor. - See
Step 4 Prepare the concrete mix in your wheelbarrow.
Figure 7 - In-Ground Anchor
In-Ground Anchor
1.
Step 5 Position the In-Ground Anchor in the hole and use the spirit level on the Spigot to ensure the anchor
is level. See
Figure 7.3
wish to position your umbrella - see
Warning: It is vital that you ensure the Bolt oles on the Spigot & In-Ground Anchor are orientated correctly.
Step 6 Pour concrete into the hole up to the bottom of the Spigot base.
DO NOT cover any part of the Unity Spigot. See
Step 7
Use bracing and support to ensure the In-Ground Anchor and Spigot stay level.
Step 8
Allow at least 24-hours for the concrete to cure as per your chosen products recommendation.
Step 9 Slide your Rotation Plate over the Spigot and move on to Stage 4.
9
Unity Spigot
2.
Rotation Plate
Nuts
2.
for where the ground level should be. Ensure orientation is correct for how you
Figure 1
3.
NOTE: 12 Pavers stacked in 3 layers. Pavers are not supplied.
5.
Base Cover
Figure 8.
Unity Spigot
Rotation Plate
Screws
In-Ground Anchor
and (pages 6 and 10).
Figure 8
Figure 7.
4.
Optional Wheels / Castors
Figure 7.
3.
Ground level
Note: Do not cover the Spigot
www.shadowspec.com
Pavers