Subscribe to Our Youtube Channel
Related Manuals for Shadowspec UNITY OCTAGON DUO
Summary of Contents for Shadowspec UNITY OCTAGON DUO
- Page 1 SHADOWSPEC UNITY ™ MULTI CANOPY CANTILEVER UMBRELLA P01/22 OWNERS MANUAL Installation, Operation, Care and Warranty SHADOWLIFT™ SHADOWGLIDE™ SHADOWLOCK™ SHADOWHUB www.shadowspec.com...
- Page 2 Read your manual in full before assembling your umbrella. To extend the life of your umbrella investment please read and follow the care instructions on a regular basis. Thank you for your purchase, we appreciate it. Enjoy the shade, courtesy of Shadowspec.
-
Page 3: Table Of Contents
STAGE 4 Assembling and Mounting Your Umbrella(s) Stage 4A - Assembly of Your Umbrella(s) Stage 4B - Mounting Your Umbrella(s) Stage 4C - Fabric Canopy Installation STAGE 5 Operating Your Umbrella SECTION 4 - ACCESSORIES 4A - LED Lights www.shadowspec.com... -
Page 4: Section 1 - Warranty
Except as expressly provided herein, all other warranties, representations, conditions, undertakings, rights, duties or liabilities, whether arising by implication of law or otherwise, are hereby expressly excluded. If you need to enquire about a warranty claim, please either contact Shadowspec direct or the sales agent you purchased your Unity from. -
Page 5: Product Registration And Warranty Validation
Shadowspec Fabric Canopies are manufactured from the most durable marine fabrics, thread and designs available. Shadowspec Fabric Canopies should be cleaned on a regular basis so dirt isn’t allowed to build-up and become embedded in the fabric. You can clean your Fabric Canopy without removing it from the Frame if you prefer, or it’s as easy to remove as it was to put on. -
Page 6: Section 3 - Assembly, Installation And Operation
*Freestanding Base installations will add 165mm to these measurements. Adding Freestanding Base wheels also will add a further 45-80mm/2-3’’ . All sizings are +/- 2.5mm / 3/32’’ and subject to change without notice. NOTE: For the Unity Duo, Trio and Quattro the gap between adjoining umbrellas is 150mm / 6” www.shadowspec.com... -
Page 7: Stage 2 Naming And Checking Your Umbrella Parts
When unpacking your Unity umbrella please check you have all the correct parts pictured below before beginning the assembly. If any parts are missing please contact support@shadowspec.com to create a ticket to resolve. You will need to refer back to this page so why not earmark it for quick reference whilst you’re assembling your umbrella. -
Page 8: Stage 3 Installation Of Your Umbrella Mount
Step 6 Place the Freestanding Base in the desired location. Step 7 Insert the 12 pavers for ballast then slide the base cover over top. Step 8 Slide your Rotation Plate over the Spigot and move on to Stage 4. www.shadowspec.com... -
Page 9: Option 2 - In-Ground Anchor
Use bracing and support to ensure the In-Ground Anchor and Spigot stay level. Step 8 Allow at least 24-hours for the concrete to cure as per your chosen products recommendation. Step 9 Slide your Rotation Plate over the Spigot and move on to Stage 4. www.shadowspec.com... -
Page 10: Option 3 - Surface Plate
It’s also recommended to use washers to space the plate on the decking to allow water to escape to minimise water damage to the deck. Figure 9 - Surface Plate Unity Spigot Surface Plate Rotation Plate Surface Plate Bolts www.shadowspec.com... - Page 11 Minimum 150mm / 6” Edge of slab CONCRETE SLAB Recommended minimum depth of reinforced concrete slab 100mm / 4”. NOTE: No screws or fixings to be within 150mm / 6” of closest edge of concrete slab. Spigot and Surface Plate Mount www.shadowspec.com...
-
Page 12: Option 4 - Wall Base Bracket
Drill holes ensuring that they are parallel to each other and secure the Wall Mount bracket to the wall. Step 7 Slide your Rotation Plate over the Spigot and move on to Stage 4. Figure 12 - Wall Base Bracket Unity Spigot Wall Mount Rotation Plate NOTE: Refer to Spigot orientation diagram - Figure 8 www.shadowspec.com... -
Page 13: Stage 4 Assembling And Mounting Your Umbrella(S)
4A) ASSEMBLING YOUR UMBRELLA: Shadowspec Unity comes partially assembled which is great! If you have a Duo, Trio or Quattro you’ll need to attach a few things to the Mast to add your additional Frames. Remove the pre-assembled Unity umbrella from your box packaging and make sure you place it somewhere where the surface of your umbrella parts won’t get scuffed or... -
Page 14: Stage 4B - Mounting Your Umbrella(S)
Step 14 Together now, lift the Unity Umbrella up and manoeuvre it over the Spigot so the base of the Mast is positioned over the top of the Spigot. Note: Remember to lightly grease the spigot with the supplied grease. www.shadowspec.com... - Page 15 Gas Spring (note only one screw will be used). Please remember Figure 17 - Shadowlift - Gas Spring Installation Top Eyelet Body Shaft Bottom Eyelet Note orientation of Gas Spring NOTE: Please note the orientation of the Gas Spring. The thinner shaft must always point downwards. www.shadowspec.com...
-
Page 16: Stage 4C - Fabric Canopy Installation
Lift the Shadowglide Carriage to the top, slowly, to test the tension of the Fabric Canopy. See Figure 18 tension adjustability options for the Fabric Canopy. Step 7 Repeat for each Additional Frame (2-4). TIP: Reposition the bottom velcro strip if needed so it is perfectly symmetrical onto the Through-Spar. www.shadowspec.com... -
Page 17: Stage 5 Operating Your Umbrella
STAGE 5 OPERATING YOUR UMBRELLA Your Shadowspec Unity is engineered to be easy to use. Squeeze the Shadowglide Button to release the Carriage from its closed position and push it up the Mast until it locks in place. Step 1 To open your umbrella, push down onto the Shadowglide Button located in the Shadowglide Handle and assist the opening by pushing the Carriage with the with the palm of your hand upwards until it locks into place. -
Page 18: Section 4 - Accessories
The SS-1 Smart Battery allows the user to control the LED Light via any Android mobile device using the Shadowspec App or operate the LED Light using the manual on/off button located on the end of the SS-1 Smart Battery itself. - Page 19 RECHARGEABLE SMART BATTERY CARE AND RULES FOR USE • Only use the Shadowspec Charging Adapter to charge the Shadowspec SS-1 Bluetooth LED Smart Battery. • Please charge your SS-1 Smart Battery completely before the very first time it is used.
- Page 20 Contact our in-house shade and outdoor specialists for more information and advice. AUSTRALIA NEW ZEALAND UNITED STATES Australian Nest Heron Base North American Nest Atlanta, Georgia Laverton North, Victoria Whangarei, Northland 844 888 5577 1800 144 155 0800 144 155 www.shadowspec.com www.shadowspec.com.au www.shadowspec.co.nz...
Need help?
Do you have a question about the UNITY OCTAGON DUO and is the answer not in the manual?
Questions and answers