Subscribe to Our Youtube Channel
Related Manuals for Shadowspec RETREAT
Summary of Contents for Shadowspec RETREAT
- Page 1 Shadowspec ™ RETREAT The Wall Mounted Umbrella OWNERS MANUAL Operation, Care and Warranty www.shadowspec.com P01/22...
-
Page 2: Table Of Contents
Thank you for your purchase, we appreciate it. Closing your Shadowspec Retreat™ Enjoy the shade, courtesy of Shadowspec. Shadowspec Retreat™ Protection Cover Shadowspec Retreat™ Parts Shadowspec Retreat™ Canopy Assembly www.shadowspec.com Shadowspec Retreat™ Arm Assembly & Wall Mount Shadowspec Retreat™ Replacement Parts Shadowspec Retreat™ Parts List www.shadowspec.com... -
Page 3: Shadowspec Retreat™ Warranty
If you need to enquire about a warranty claim, please either contact Shadowspec direct or the sales agent you purchased your Shadowspec Retreat from. -
Page 4: Shadowspec Retreat™ Care
In cases where the Shadowspec Retreat is taken down and stored during the winter season, the canopy should be cleaned, allowed to air dry, and stored in a dry, well ventilated area. A Protection Cover should be used at all times when umbrella is not in use to ensure the longest serviceable life. -
Page 5: Shadowspec Retreat™ Operation
4. Pull the Claw Pin 5. Rotate the Canopy 90o away 6. Your Retreat will be in the 11. As the Lower Pole becomes parallel with with Retreat Arm clip it into the C-Clip. from the Retreat Arm ready-to-deploy position 7. -
Page 6: Tilting Your Shadowspec Retreat
Your Shadowspec Retreat can extend an additional 460mm from the wall. This enables a wider Your Shadowspec Retreat™ has the ability to tilt to follow the sun. The Retreat will tilt 16 degrees rotation angle when the umbrella is mounted against a wall. -
Page 7: Closing Your Shadowspec Retreat
Shadowspec Retreat™ Operation Closing your Shadowspec Retreat™ 1. Return your Retreat to the default position, extention, rotation and tilt. 4. Push the Claw Lock Button 5. Push the Lower Pole upward 6. Pull the Shoulder Lock Pin out 2. Unclip the Lower Pole from the C-Clip 7. -
Page 8: Shadowspec Retreat™ Protection Cover
Shadowspec Retreat™ Parts Shadowspec Retreat™ Canopy Assembly Shadowspec Retreat™ Canopy Assembly Your Shadowspec Retreat™ is supplied with a Protection Cover to extend the life of your umbrella. 2.7m Hexagon Canopy 1. Ensure your canopy isn't pinched in the arms 2. Slide the Retreat Protection Cover Down 2.7m Hexagon Frame... - Page 9 Pole End Cap Lower Pole Claw Bracket Female Elbow Shadowcam Wheel Male Elbow Latch Lever C-Clip Retreat Wall Mount Parts Retreat Shoulder Parts Rib Replacement Parts Bottom Catch Bracket Wall Grab Plate Swivel Cap Spring Bracket Pivot Fork Top Rib...
-
Page 10: Shadowspec Retreat™ Replacement Parts
Shadowspec Retreat™ Parts Umbrella Location Part Name Code Reference information for individual parts of Umbrella Frame 2.7m Hexagon Canopy UM110725 your Shadowspec Retreat umbrella. 2.7m Hexagon Frame UM010046 To order replacement parts contact: Arm Assembly Retreat Arm UM110502 C-Clip UM110502 customercare@shadowspec.com... - Page 11 Contact our in-house shade and outdoor specialists for more information and advice. AUSTRALIA NEW ZEALAND UNITED STATES Australian Nest Heron Base North American Nest Houston, Texas Laverton North, Victoria Whangarei, Northland 844 888 5577 1800 144 155 0800 144 155 www.shadowspec.com www.shadowspec.com.au www.shadowspec.co.nz...
Need help?
Do you have a question about the RETREAT and is the answer not in the manual?
Questions and answers