General Information; Introduction; Safety Precautions - Labgear DAT103 Operating Manual

Dvb-t signal analyzer

Hide thumbs

Table Of Contents

Table of Contents

1.1 Introduction

This operating manual introduces the design, functions and basic instructions for

operation of the LABGEAR DAT103 Digital and Analogue Television analyzer.

DAT103 is designed to permit optimal testing and adjustment of complete television

and broadcast distribution networks, network components and related electronic products.

The analyzer allows measurement DVB-T Digital and Analogue TV signals.

DAT103 can be useful in a laboratory, or in the field thanks to flexible powering options

that includes an internal re-chargeable Li-ion battery.

In this manual the following abbreviations are used:

ADC

BER

COFDM

DVB-T

LCD

MER

MPEG2

preBER

postBER

QAM

QPSK

1.2 Safety precautions

Thoroughly inspect the product and carefully read the related documentation to get

acquainted with all the safety markings and instructions before you start to operate the

analyzer.

WARNING Only trained service personnel should attempt to repair this analyzer.

CAUTION Tuning the analyzer and replacement of the components that influence the

accuracy of measurements without service personnel is strictly prohibited, since the

components used in the Analyzer are purpose-made and their replacement will result in

inaccurate operation of the Analyzer. To exclude the possibility of mechanical damage to

the DAT103, the instructions regarding the storage and transportation (Sections 7 and 8)

of the analyzer must be observed.

Take care to keep coax braid wire cuttings away from your analyzer. Just one piece

inside can be expensive to locate and remove and may even cause permanently damage.