Labgear DAT103 Operating Manual page 8

Figure 4.3.1
The Main menu is divided into 2 halves, to step between press the
will see the other Main menu options (Figure 4.3.2). To return to the previous line press
the or arrow again. Function of menu are selectable with the function keys F1, F2 and
F3, which are located under each icon. To return to the Main menu from any function,
press key.
The 6 Main menu functions are accessed with the following icons:
a) LEVEL measurement ........................................................
b) SCAN measurement .........................................................
c) MER/BER measurement...................................................
d) Service menu ....................................................................
e) Data manager menu .........................................................
f) PC connection...................................................................
When is chosen from the Main menu, the Service menu appears on screen
(Figure 4.3.3), and when
Figure 4.3.3
Function of service menu and data manager menu are selectable with function keys
F1, F2 and F3, which are under the relevant icons. To return to previous menu from the
selected function, press
The 5 Service menu and data manager functions are accessed with the following icons:
a) Setup.................................................................................
b) Self-test.............................................................................
c) Identification ......................................................................
d) Channel plans manager ....................................................
e) Data log manager..............................................................
is chosen, the Data manager menu appears (Figure 4.3.4).
key. To return to the Main menu press
Figure 4.3.2
or arrow. You
;
;
;
;
;
.
Figure 4.3.4
again.
;
;
;
;
;
9